Close Menu
    WiFi / Internet & Networking

    How to Fix “No Internet, Secured” WiFi Error

    adminBy No Comments6 Mins Read
    How to Fix “No Internet, Secured” WiFi Error
    How to Fix “No Internet, Secured” WiFi Error

    When you’re all set to stream your favorite show, download a game, or attend an online class, the last thing you want to see is the dreaded “No Internet, Secured” WiFi error on your Windows computer. The WiFi shows as connected, yet the internet refuses to work.

    This issue can feel confusing, but the good news is—it’s fixable. In this detailed guide, we’ll break down why this happens and give you step-by-step solutions that anyone can follow, even if you aren’t very tech-savvy.

    What Does “No Internet, Secured” Mean?

    When you connect your computer to WiFi, Windows sometimes displays a message like:

    • Connected, Secured → This means you’re online and safe.

    • No Internet, Secured → This means your PC is connected to the WiFi router, but the router isn’t providing internet access.

    In simple words: your device and the WiFi are talking, but the WiFi and the internet are not.

    Why Does This Error Happen?

    Several reasons can trigger the No Internet, Secured message. Here are the most common causes:

    1. Router problems – A temporary glitch in your router or modem.

    2. ISP issues – Your internet provider may be down.

    3. Incorrect network settings – Wrong IP or DNS settings on your PC.

    4. Outdated drivers – Old or corrupted WiFi drivers.

    5. Windows updates – Updates sometimes reset or conflict with network settings.

    6. VPN interference – Misconfigured VPN software can block connections.

    7. Firewall or antivirus settings – Security tools may stop your internet.

    Quick Things to Try First

    Before diving into technical fixes, check these simple things:

    • ✅ Restart your router and PC.

    • ✅ Make sure your internet bill is paid.

    • ✅ Check if other devices (phone, tablet) can connect to the internet.

    • ✅ Move closer to your WiFi router to avoid weak signals.

    If the problem remains, move on to the detailed solutions below.

    Step-by-Step Solutions to Fix “No Internet, Secured” Error

    Let’s go through proven fixes one by one. You don’t have to try them all—just follow until your WiFi works again.

    1. Restart Your Router and PC (Basic Reset)

    • Turn off your WiFi router and unplug it from power.

    • Wait at least 30 seconds.

    • Plug it back in and let it fully restart.

    • Restart your PC and reconnect to WiFi.

    This simple step often clears temporary network glitches.

    2. Forget and Reconnect to the WiFi

    Sometimes your PC saves old WiFi settings that conflict with new ones.

    Steps:

    1. Click on the WiFi icon in the taskbar.

    2. Right-click your WiFi network → Forget.

    3. Reconnect and enter your password again.

    3. Run Windows Network Troubleshooter

    Windows has a built-in tool to automatically detect and fix issues.

    Steps:

    1. Right-click the WiFi icon → Troubleshoot problems.

    2. Follow the on-screen instructions.

    3. Restart your computer once done.

    4. Reset Your Network Adapter

    If the adapter is misconfigured, resetting it can help.

    Steps:

    1. Press Windows + R, type ncpa.cpl, and hit Enter.

    2. Right-click your WiFi adapter → Disable.

    3. Wait 10 seconds, then Enable it again.

    5. Update WiFi Drivers

    Outdated drivers are a common culprit.

    Steps:

    1. Press Windows + X → Device Manager.

    2. Expand Network adapters.

    3. Right-click your WiFi adapter → Update driver.

    4. Select Search automatically for drivers.

    If Windows doesn’t find one, you can download the latest driver from your laptop manufacturer’s website.

    6. Reset TCP/IP and DNS Settings

    Your PC uses TCP/IP and DNS to connect online. If they get corrupted, internet stops working.

    Steps:

    1. Search for Command Prompt, right-click, and select Run as administrator.

    2. Type these commands one by one and press Enter after each:

    netsh winsock reset
    netsh int ip reset
    ipconfig /release
    ipconfig /renew
    ipconfig /flushdns

    1. Restart your computer.

    7. Assign a Manual IP Address

    Sometimes your PC fails to get an IP from the router. Setting it manually helps.

    Steps:

    1. Press Windows + R, type ncpa.cpl, and press Enter.

    2. Right-click WiFi adapter → Properties.

    3. Double-click Internet Protocol Version 4 (TCP/IPv4).

    4. Select Use the following IP address and enter:

    • IP Address: 192.168.1.100

    • Subnet Mask: 255.255.255.0

    • Default Gateway: 192.168.1.1

    • Preferred DNS: 8.8.8.8 (Google DNS)

    • Alternate DNS: 8.8.4.4

    1. Click OK and reconnect.

    8. Disable VPN Temporarily

    If you’re using a VPN, turn it off and try connecting again. Some VPNs block proper network routing.

    9. Adjust Power Settings for WiFi Adapter

    Windows sometimes turns off WiFi to save power.

    Steps:

    1. Press Windows + X → Device Manager.

    2. Right-click your WiFi adapter → Properties.

    3. Go to Power Management tab.

    4. Uncheck Allow the computer to turn off this device to save power.

      How to Fix “No Internet, Secured” WiFi Error
      How to Fix “No Internet, Secured” WiFi Error

    10. Check Firewall and Antivirus

    Security software can sometimes block the internet. Temporarily disable your firewall or antivirus and see if the error disappears. If yes, adjust settings or reinstall the software.

    11. Reset Network Settings in Windows

    If nothing works, reset everything back to default.

    Steps:

    1. Press Windows + I → Network & Internet.

    2. Scroll down → Network reset.

    3. Click Reset now and restart your PC.

    ⚠️ This will remove saved WiFi networks, so you’ll need to reconnect with passwords.

    Comparison Table: Solutions at a Glance

    Method Difficulty Time Needed Success Rate
    Restart router & PC Easy 2 min High
    Forget & reconnect WiFi Easy 3 min Medium
    Run troubleshooter Easy 5 min Medium
    Reset adapter Medium 5 min Medium
    Update drivers Medium 10 min High
    Reset TCP/IP & DNS Medium 10 min High
    Manual IP address Medium 10 min Medium
    Disable VPN Easy 2 min Medium
    Adjust power settings Easy 5 min Medium
    Check firewall/antivirus Medium 10 min Medium
    Reset network settings Medium 15 min Very High

    Preventing the Error in the Future

    Here are tips to avoid seeing this error again:

    • Keep your Windows and drivers updated.

    • Reboot your router once a week.

    • Use a reliable antivirus program.

    • Don’t overload your WiFi with too many devices.

    • Use a strong router with updated firmware.

    FAQ About “No Internet, Secured” WiFi Error

    Q1: Does this error mean my computer is broken?
    No. It usually means a temporary issue with WiFi or router, not your hardware.

    Q2: Can this happen on Windows 10 and Windows 11?
    Yes, both versions can show this error.

    Q3: Will resetting the network delete my data?
    No, but it will remove saved WiFi networks and VPN settings.

    Final Thoughts

    The “No Internet, Secured” WiFi error is frustrating, but it’s not the end of the world. In most cases, a quick router reset or a few adjustments in your PC settings will bring your internet back.

    By following the step-by-step methods in this guide—starting from simple fixes like restarting your router to advanced ones like resetting TCP/IP—you’ll be able to solve the issue without needing a technician.

    Stay updated, maintain your network health, and keep these tips handy for the next time WiFi decides to act up.

    Share.

    Related Posts

    Add A Comment
    Leave A Reply